High-pressure solenoid valve leakage repair
A: Causes of leakage of high-pressure solenoid valve products 3 , After a long period of use, the mechanical parts of the high-pressure solenoid valve wear, such as leaks caused by seals and packing wear. Â
Simple numerical control Spinning Machine
It is suitable for the spinning of various substrates such as aluminum plate, copper plate, iron plate, stainless steel plate and steel plate for lamps, cookers and crafts. The batch production of a series of products such as barrel type, cone type, parabolic type, horn type and warhead type can be finished.
Spinning Machine Spinning Machine,Spinning Equipment,Spinning Machinery,Spinning Frame Machine Dongguan Rener Automation Technologies Co.,Ltd , https://www.rener-automation.com
1. The actual working environment of the high pressure solenoid valve and the properties of the medium exceed the product's adaptation range.
2. The installation of high-pressure solenoid valve is wrong, or the filling method is not caused by the leakage of the high-pressure solenoid valve product. Â Â Â Â Â Â
    Two: Checkpoints for Leakage of High-Pressure Solenoid Valves
1. Disassembly and overhaul of high pressure solenoid valve products require that the working environment must be clean
2. When cleaning the outside of the high-pressure solenoid valve, remember the nameplate and various signs
3 , pay attention to check the contact surface between the base and the valve plate
4 , check the high pressure solenoid valve mechanical seal parts of the degree of wear.
    Related operations after high pressure solenoid valve fault check: In the process of troubleshooting the high pressure solenoid valve, if there is a component that is found to be damaged by the high voltage solenoid valve, it should be replaced or repaired. Pay special attention to several important fillers and seals. After the installation is completed, it cannot be used immediately. It is necessary to conduct a work test first to test the working strength and tightness of the high-pressure solenoid valve.
    High-pressure solenoid valve products are widely used in fluid transportation equipment and are usually used in conjunction with pipelines, pumps, and other fluid conveying equipment. Correct operation and use have a great effect on the extension of the life of the solenoid valve and reduce the failure rate. The maintenance and maintenance of the solenoid valve product and its specific operations are as follows:
1. After installation of high-pressure solenoid valve products, the user needs to pass through the medium to test first. After the solenoid valve products work normally, they can be officially put into work.
2. In the process of using the high-pressure solenoid valve product, attention should be paid to the pressure working range of the product. Working pressure exceeding the working range of the product may damage the solenoid valve product, causing leakage and causing losses to the user. If there is a pressure abnormality or exceeds the actual working range of the solenoid valve, immediately close the front and back manual valves of the solenoid valve to stop the solenoid valve.
3 , mechanical equipment in the working state, should avoid the occurrence of loose, in order to reduce mechanical vibration, reduce mechanical damage, extend the service life of the solenoid valve.
4 , high pressure solenoid valve in the working state, should avoid collision and contact with other heavy objects. In order to avoid affecting the work of the solenoid valve.
5 , high pressure solenoid valve product seal is one of the important components of the entire solenoid valve, should ensure the performance of the solenoid valve seal. And keep the interior of the solenoid valve clean.
6. For electromagnetic valve products that work in special environments, such as close to water sources, too much debris in the work environment, etc., electromagnetic valve should be equipped with appropriate protective equipment.
7. If the high-pressure solenoid valve product is not used within a certain period of time, the user needs to close the manual valve before the valve and clean the interior of the solenoid valve to ensure that the solenoid valve is dry and then stored.
8 , due to the variety of solenoid valve products, each model has its own characteristics and scope of work. For new users, you can refer to the product descriptions of sales personnel and technicians of Lidicon Valve Industry and select the products that are more suitable for you.
Product category: spinning machine series