How to keep air clean in bulk feed carriers
Nowadays people have higher and higher requirements for air quality. Of course, if there is no good air when driving, it will also affect the driver's mood. The following Xiaobian teaches us two techniques to keep indoor air clean in bulk feed vehicles. Hope to help the driver's friends. 1. Correctly open the internal/external circulation of the feed carrier For the driver of the feed carrier, the best way to keep the air in the vehicle is to use the internal/external circulation correctly. The external circulation state is the use of a fan to draw the air outside the vehicle into the vehicle, because the outside of the vehicle and the air passage in the vehicle are in circulation. The wind blown by the fan comes from outside the vehicle. Even if the fan is not turned on, there is still airflow in the vehicle during travel. Inside the car, replenish the fresh air in the car. The internal circulation state is to close the air flow channel inside and outside the vehicle. There is no air circulation when the fan is not opened. The air flow that is drawn in when the air blower is turned on also only comes from inside the vehicle, and the air circulation inside the vehicle is formed. The internal circulation is mainly to effectively prevent external dust and harmful gases from entering the vehicle in a timely and effective manner. For example, when exhausted by smoke, dust, odors, or when the vehicle is densely and compactly driven, it blocks the harmful exhaust gas discharged by the preceding vehicle. Another function is insulation. 2, replace the bulk feed transport air filter If you frequently go through dusty and rough roads in the near future, be aware that there may have accumulated a lot of dust in the air-conditioning radiators and pipes of your vehicles. If you do not clear them in time, it will be a harm to human health. Bulk feed truck air conditioner filters can effectively reduce pollutants entering the feed truck through the heating, ventilation, and air-conditioning systems, and prevent inhalation of harmful pollutants. It consists of a filter element and a housing. Its main requirement is high filtration efficiency and low flow resistance. It should be noted that the air conditioning piping and the air filter must be washed. The method of self-cleaning is to remove the filter element from the air cleaner, remove the dust from it by means of a beat or rake, or use a blower to blow off the dirt. If the filter element is found to be too dirty, then It will be replaced. To clean the air-conditioning duct dust, you can directly inject special cleaning agent into the air-conditioning inlet, and then open the air-conditioning loop, you can remove the dust in the pipeline. In addition, many car owners like to smoke in the car, where the owner is advised not to smoke. Smoking is bad for air quality and harmful to health. Moreover, in the new traffic regulations, smoking is also not allowed.
with a team of professional Doctors and master, postdoctoral to do research and development of products and solutions. We developed many new air filter materials, such as Formaldehyde Removal Filter material, Ammonia Removal Filter, Ozone Removal Filter
About us:
Shenzhen China Textile Filters was established in August,2004. An integrated enterprise, specialized in manufacturing, researching and developing all kinds of filter materials and non-woven fabrics.
We have a group of high-level technicians, advanced equipment of melt-blown fabric, Air Filter Paper, pocket filter media, mini-pleat filter pack, HEPA filter media, etc
After years of development, our products spread all over the world and become the leading production and supplying base of filter materials in the world.
Custom Filters True Hepa Filter,Formaldehyde Removal Filter,Ammonia Removal Filter,Ozone Removal Filter Shenzhen China Textile Filters , https://www.ctfiltech.com