Two simple fault-solving methods for residential vehicles
There is a breakdown in the process of tourism in the tourist car. Do not be overly alarmed. Do not blindly dismantle any components. What should I do when I'm in a car heater? When the water heater leaks, most of the faults are in the pressure relief valve. Because under the principle of thermal expansion and contraction, when the water is heated, the volume will become larger, so that after the water heater of the RV is enough, water will leak out of the thermal reaction valve. In fact, the solution to the problem of leaking water is simple. Then we close the water heater and close it after closing the external end. Then turn on any tap in the RV. After waiting for the vehicle water heater to cool off itself, a little attention should be paid to the lever that pulls the thermal reaction valve. After waiting for the water to flow out, the water will overflow, then close the reaction valve and then put it in the tube. After waiting for the water pressure in the RV to gradually recover, after the water heater is turned on, you will find that the water leakage situation seems to be much better than before. When the faucet and the valve are opened, the pressure above the water heater tank becomes very large. After the water is inflated, it will accumulate the pores without overflow. There are also many situations in which the brakes of the RVs are out of order. Under long-term driving conditions, failure of the brakes may also be a fault that will be encountered, or it may be due to the improper timing of the driving of the RVs by Cao Oudi. Failure to brake is a terrible and dangerous breakdown. All these situations can happen unexpectedly. Natural obstacles can be used to force a stop in a residential vehicle, or the hand brake of a vehicle can be tightened and released several times to reduce the speed. If there is a brake failure on the uphill section of the road, you should keep the forward low gear, brake your hand and tighten it, and then let the person immediately go to find a stone or other hard thing to live in. The owner of the car's wheels avoids accidents.
PPGI is pre-painted galvanized steel, also known as pre-coated steel, color coated steel etc.
Using Hot Galvanized Steel Coil as the substrate, PPGI is made by first going through surface pretreatment, then the coating of one or more layers of liquid coating by roll coating, and finally baking and cooling. The coatings used including polyester, silicon modified polyester, high-durability, corrosion-resistance and formability.
We are a PPGI & PPGL Supplier, China. Our PPGI (Prepainted Galvanized Steel) & PPGL (Prepainted Galvalume Steel) are available in a variety of specifications.
We could also provide the product life length lasts for decades as customers required.
PPGI Prepainted Galvanized Coils Prepainted Galvanized Coils YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn