Lower Cost Reusable Air Bag for Block Pushing in Stone Quarry

March 05, 2021

Model NO.: AB150
Application: Granite/Marble/Stone Quarry
Transport Package: Carton with Waterproof Plastic
Specification: 1.5*1.5m
Origin: Made in China
Model NO.: AB150
Application: Granite/Marble/Stone Quarry
Transport Package: Carton with Waterproof Plastic
Specification: 1.5*1.5m
Origin: Made in China
Description: 
The Air Bag is manufactured with high-tech materials and processed by special techniques,, with very low rate of problem in split and damage. It performs well and becomes very good solution for block splitting after wire saw cutting in natural stone mining with high efficiency and low costs.

Splitting and overturning pushing air bag operational procedure:
  1. To avoid damages to the pushing air bag at deployment, start by carefully clearing the edges of the stone block of possible debris.
  2. According to the dimension of blocks to determine the types and number of pushing air bag required to spread an opening 15cm between the sawed block and the quarry.
  3. Fasten one end of two pull back ropes the rings at the upper edge the bag and tie the other ends to fixed point.
  4. Link the air supply through pressure gauge tube to the bag.
  5. Begin the inflating operation by opening the ball valve connected to the bag.
  6. Continue inflating until obtaining opening of 10-15cm opening, place appropriate metal wedges under the stone block.
  7. Overlap the bags until overturning block.
  8. Shut off the air input valve of each bag, disconnected the hoses from t he bag, after the deflation is completed, pull out the bags.
Technical Data: 
Specification (mm) Pushing Power (Ton)
500 x 500 15
500 x 1000 25
1000 x 1000 50
1000 x 1500 75
1000 x 2000 100
1500 x 1500 115
1500 x 2000 150
1800 x 1800 165
1800 x 2000 180
2000 x 2000 200
2000 x 2200 220
 Lower Cost Reusable Air Bag for Block Pushing in Stone Quarry
Lower Cost Reusable Air Bag for Block Pushing in Stone Quarry
Package and Shipping:
Package: Carton for sample or small order, crate for large order
Shipping: DHL, TNT, Fedex, Air, Sea shipment

Our Service:Lower Cost Reusable Air Bag for Block Pushing in Stone QuarryLower Cost Reusable Air Bag for Block Pushing in Stone Quarry

Always at your Service!
Description: 
The Air Bag is manufactured with high-tech materials and processed by special techniques,, with very low rate of problem in split and damage. It performs well and becomes very good solution for block splitting after wire saw cutting in natural stone mining with high efficiency and low costs.

Splitting and overturning pushing air bag operational procedure:
  1. To avoid damages to the pushing air bag at deployment, start by carefully clearing the edges of the stone block of possible debris.
  2. According to the dimension of blocks to determine the types and number of pushing air bag required to spread an opening 15cm between the sawed block and the quarry.
  3. Fasten one end of two pull back ropes the rings at the upper edge the bag and tie the other ends to fixed point.
  4. Link the air supply through pressure gauge tube to the bag.
  5. Begin the inflating operation by opening the ball valve connected to the bag.
  6. Continue inflating until obtaining opening of 10-15cm opening, place appropriate metal wedges under the stone block.
  7. Overlap the bags until overturning block.
  8. Shut off the air input valve of each bag, disconnected the hoses from t he bag, after the deflation is completed, pull out the bags.
Technical Data: 
Specification (mm) Pushing Power (Ton)
500 x 500 15
500 x 1000 25
1000 x 1000 50
1000 x 1500 75
1000 x 2000 100
1500 x 1500 115
1500 x 2000 150
1800 x 1800 165
1800 x 2000 180
2000 x 2000 200
2000 x 2200 220
 Lower Cost Reusable Air Bag for Block Pushing in Stone Quarry
Lower Cost Reusable Air Bag for Block Pushing in Stone Quarry
Package and Shipping:
Package: Carton for sample or small order, crate for large order
Shipping: DHL, TNT, Fedex, Air, Sea shipment

Our Service:Lower Cost Reusable Air Bag for Block Pushing in Stone QuarryLower Cost Reusable Air Bag for Block Pushing in Stone Quarry

Always at your Service!

EPT specialize in Rapid Vacuum Casting (also referred to as room temperature vulcanization/RTV) to create short run quantities of production-like parts at low cost to the customer.
Vacuum casting offers a wide range of options for companies needing specific finishes,materials, or other features in their prototypes. We have the ability to simulate a full range of thermoplastics and elastomers, and we can also over-mold one 
material over another to simulate, for example, rubber over ABS, or opaque plastic over transparent plastic. It is also possible to over-mold threaded inserts.
After casting, painting and printing is common, although polyurethane casted parts can be colored in the mold. EPT also specialize in producing high-gloss clear parts by using a CNC machined and polished acrylic master model. Polyurethane casted clear parts are very high quality.
We can create small and large urethane cast parts with production-like aesthetics and material properties for a range of applications, including medical and healthcare, military, automotive, electronics packaging, consumer products, and others.


Arcylic Like

Arcylic Like,Arcylic Like Prototype,Auto Lighting Outer Lens,High Bright Surface Crystal

Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com