Boron magnesium ore dressing technology
Different beneficiation methods are used depending on the type of ore . 1. Boraxite type Liaoning Liaoning Geological Central Laboratory had Houxianyu boron ore mine of this type of flotation pilot test carried out. The test ore adopts the middle ore remaining after hand selection, and the B2O3 content is 7% to 8%. The flotation process control conditions are: the ore size is 3~0 mm, the I section grinding fineness -200 mesh accounts for 40%, the graded overflow concentration is 25%; the II section grinding fineness -200 mesh accounts for 75%, the graded overflow The flow concentration is 14%. The flotation slurry has a pH of 6.5 to 7.0 and a flotation temperature of about 40 °C. Second, boehmite-magnetite-serpentine type Such main mineral ore szaibelyite, a magnetic iron ore and serpentine. Boraxite is mainly fibrous, and the particle size of impregnation is generally 0.05 to 0.10 mm. The magnetite is impregnated with a particle size of 0.30 to 0.1 mm and is closely associated with the boehmite. A weak magnetic separation or weak magnetic separation-flotation combined process is employed. Figure 1 is Fengcheng, Liaoning The stage of the second stage boron ore, the single weak magnetic separation process of magnetic separation. Third, boehmite-carbonate type The main minerals of Gaotaigou boron mine in Jilin Ji'an are boehmite, serpentine and magnesite . This type of boron ore can be either preferential or mixed flotation. See Figure 2 and Figure 3. 4. Boron magnesium petrochemical boron-magnesium iron ore-magnetite Among such ores, boromagnesite, magnetite and serpentine are the main minerals. According to their specific magnetic susceptibility, a boron-magnesium iron concentrate can be obtained by using a weak magnetic-strong magnetic full magnetic separation process. The separation rate of ferro-boron can be determined by electric furnace smelting-pressure alkali hydrolysis method or direct reduction-magnetic separation method. 5. Uranium-boron-magnesium-iron-mineralized boehmite-magnetite type The main useful elements of this type of deposit are iron, uranium , boron and magnesium. The Wengquangou uranium-iron-boron deposit in Liaoning belongs to this category. The ore dressing method steps are: selecting magnetite by wet weak magnetic field; recovering crystalline uranium ore by re-election, and obtaining boron-magnesium iron concentrate; obtaining boron concentrate by hydrocyclone classification, and the total selection process is as follows: Figure 4.
A fastener is a hardware device that
mechanically joins or affixes two or more objects together.
Fasteners can also be used to close a
container such as a bag, a box, or an envelope; or they may involve keeping
together the sides of an opening of flexible material, attaching a lid to a
container, etc. There are also special-purpose closing devices, e.g. a bread
clip. Fasteners used in these manners are often temporary, in that they may be
fastened and unfastened repeatedly.
Some types of woodworking joints make use
of separate internal reinforcements, such as dowels or biscuits, which in a
sense can be considered fasteners within the scope of the joint system,
although on their own they are not general purpose fasteners.
Furniture supplied in flat-pack form often
uses cam dowels locked by cam locks, also known as conformat fasteners.
Items like a rope, string, wire (e.g. metal
wire, possibly coated with plastic, or multiple parallel wires kept together by
a plastic strip coating), cable, chain, or plastic wrap may be used to
mechanically join objects; but are not generally categorized as fasteners
because they have additional common uses. Likewise, hinges and springs may join
objects together, but are ordinarily not considered fasteners because their
primary purpose is to allow articulation rather than rigid affixment.
Other alternative methods of joining
materials include: crimping, welding, soldering, brazing, taping, gluing,
cementing, or the use of other adhesives. The use of force may also be used,
such as with magnets, vacuum (like suction cups), or even friction.
Fasteners are used for fastening and
application of a very broad class of mechanical parts. In all kinds of
machinery, equipment, vehicles, ships, railways, bridges, buildings,
structures, tools, equipment, instruments and supplies, such as the above, you
can see a wide variety of fasteners. It is characterized by many different
specifications, performance of different purposes, and standardization,
serialization, GM seed is also very high degree. Therefore, it was also the existing
national standards for a class called fasteners standard fasteners, or simply
standard parts. Fasteners are the most widely used machine parts. With China's
accession to the WTO in 2001 and entered the ranks of the international trading
nation. China's fastener products are exported to countries around the world,
the world's fastener products are constantly influx of Chinese market. As one
of the fasteners import and export volume of larger products, to achieve
international standards, to promote Chinese enterprises to the world of
fasteners, fastener enterprises to promote the full participation of
international cooperation and competition, with all the important practical
significance and strategic significance. Due to the specific requirements of each
specific fastener product specifications, dimensions, tolerances, weight,
performance, surface condition, marking methods, and acceptance inspection,
marking and packaging projects.
We supply big range of such fastener.
B.
Main particulars
MAIN
PARTICULARS
Material
Carbon
steel(20#-60#, S235-S355-), Alloy steel(4140,4340,42CrMo, -)
Standard
ASTM, ASME, DIN, JIS,
ISO, BS, API, EN
Certificate
ISO9001
Tolerance
Up
to +/- 0.002mm
Dimension
As
per drawing, as large as we can
Processing
CNC
turning, CNC turning and milling compound processing, 3/4/5 axis CNC
machining center, wire-cutting, EDM, grinding etc.
Finishing
surface
Machined
surface with oil, blasting and painting, anodize, polishing, powder painting,
electrophoretic coating-
Marking
as
per clients` requirements
Inspection
material,
construction, dimension, heat treatment, hardness, NDT
Quality
ISO9001,
PPAP control production
Lead
time
3-20
days for sample, consult with customer for mass production
Delivery
Express
for sample, ocean shipping/air for mass production
Our
Capabilities
CNC
machining, CNC center machining, drilling, milling, turning, grinding,
tapping, boring
Engineering
& manufacturing services
R&D
process, tooling and gauging design, product design
Integrated
CAD/CAM system, test and measuring
Others
Recyclable,
in line with environmental requirements and standards, and reliable
C.
Construction
Construction
by machining
D
Workmanship
The
workmanship have good production practice. Care are taken to ensure High
accuracy and smooth surfaces
E.
Certificates
-
Material certificates
-
Measuring reports
-
Inspection protocol
-
NDT reports
-
Fixed certificate: ISO9001 certificate
The photos of our Fastener
Our
service
Besides
above the general specifications, we can also supply some specific machining
parts as clients' requirements.
Package
and shipping
Export
cartons, pallets, wooden cases, Polybags
Fastener Parts,Metric Machine Screw,Oem Nut Fastener,Cap Screw Fastener Shinvast Industry Ltd , http://www.shinvastindustry.com
In addition, during the "Eighth Five-Year Plan" period, "Comprehensive utilization of boron-iron resources - research on the production of boron-containing pig iron and boron-rich slag in the bor furnace of boron ore" was carried out by the Northeast University and other units to separate the blast furnace iron and boron, and to activate the boron-rich slag. Significant progress has been made in key technologies such as boron, boron, uranium separation and uranium treatment.
