Daily processing of 4000 tons of magnetite ore dressing process

Raw ore:

After coarse breaking (PE750×1060), the conveyor enters 2 sets of fine broken (PEX250×1200) and is crushed to below 35mm, and then transports into the silo. The silo can be designed according to the site conditions, and the feeding machine (GZ5, 2) The table is uniformly fed into the ball mill (2.7×4 meters, 2 sets) for grinding. The mill discharge mineral powder enters the classifier (FG1500×9.5, 2 sets) respectively, and the classifier separates the fine materials to enter the magnetic separation. Machine sorting, the grader returns to the coarse sand to enter another billiard mill grinding, the mill discharges the mineral powder and then enters the classifier, and the graded fine material enters the magnetic separation and returns to the coarse sand and then the goal mill grinding.

Magnetic separation part:

Can be divided into rough selection rough selection. Roughly selected as magnetic separator (CTB1500×3000, 2 sets), selected as magnetic separator (CTB1200×3000, 2 sets), the classifier discharges minerals into rough selection and rough selection to select concentrates into the selection machine. thus the availability of qualified iron powder.

Dehydrated part:

The magnetic separation results in the iron fine powder being pumped into the inclined tube thick box (5m ² , 3 sets) by the slurry pump. The concentrated dehydration reduces the water content of the iron fine powder to 50% to 35%, and then enters the vacuum filter (90m). ² , 1) Filtered to make the water within 8%.

One Winding Machine which all aspects performance reach the international  advance level.