Technical indicators
1, in-phase qualitative: ≤ 15 ° for the same phase
2. Accuracy: Self-calibration error ≤ 2°, on-site test: In-phase error ≤ 8°, different phase error ≤ 13°
3, sampling rate 3 times / second
4, the host power supply is 9V±2V
5, X and Y collector power supply voltage is 12V±3V
6, the host operating current ≤ 7mA
7, X and Y collector operating current ≤ 5mA
8. The line-of-sight transmission distance between the host and the X and Y collectors is X≥150m and Y≥150m
9, working environment: -35 °C ┉ 50 °C Humidity: ≤ 95% RH
10, storage environment: -40 °C ┉ 55 °C Humidity: ≤ 95% RH
11, the product measured voltage AC level is 0.38KV ┉ 500KV
Technical Parameters
Use range: 6～35kV
Sample status: Line or equipment live parts
Ground height: less than 10 meters
Maximum distance between transmitters: less than 20 meters
Equipment operating frequency: 1.2GHZ
Technical characteristics
1, the system consists of host, X collector, Y collector, can be qualitative measurement - the same phase (the host has a voice prompts) different phases; quantitative measurement - phase angle display; phase sequence - sequence, reverse phase sequence Test transformer group; inspection.
2. Screen display content: Wireless high-voltage nuclear phase meter, different phases, in-phase, X, Y.
3, power: host a battery (NEDA/604/6F22) or the equivalent model. Each X and Y collector has 1 section of 23A battery.
4, manual shutdown or automatic shutdown (about 15 minutes after the boot host automatically shut down)
5, backlight source: In the detection phase process, if the light is too dark, resulting in difficult to read data, you can press the backlight switch.
Technical indicators
1, in-phase qualitative: ≤ 15 ° for the same phase
2. In-phase error ≤ 10°, different phase error ≤ 15°
3, sampling rate 3 times / second
4, A and B collector power supply voltage is 12V±3V
5, working environment: -35 °C ┉ 50 °C Humidity: ≤ 95% RH
6, storage environment: -40 °C ┉ 55 °C Humidity: ≤ 95% RH
CNC machining components/parts
Nanpi Jiantong Hardware Manufacturing Co., Ltd. was established in 2008. We have always maintained an earnest and responsible attitude to produce a wide range of high quality and precision components in many materials including Steel, Aluminum, Copper alloys and Plastics. Our company was ISO 9001-2015 certified and we are continuously upgrading all our processes to the most modern and efficient systems. We keep using the finest technology, machining equipment, experienced skill and strict quality assurance system to ensure your complete satisfaction.
Our precision machinery, perfect manufacturing technology, high-class quality and strong design teams will always work together with you openly, energetically and responsibly.
We look forward to cooperating with you and enjoying mutually beneficial and growing business.
Material: stainless 303,304,316,430, aluminum 6061, copper
High control ability:
(1) Precision reach 0.005 mm
(2) Center of a circle 0.003 mm
(3) Coaxial 0.003 mm
Roughness outside dimension: from 2mm to 200mm
Features: Machinery component
-optics
-medical
-motor shaft
IT application
-nuts
-handle
-thrumscrew