Slide valve pump focus on the quality of appearance and there is a big gap between foreign countries
Some manufacturers have noticed the difference between the appearance quality of the slide valve pump and that of foreign products. In terms of the appearance quality, the appearance design of the product, the quality of the castings of the pump body, the outward appearance to the development of instrumentation, the aesthetic design of the product structure, Body surface do not fight putty, paint after the assembly, so that the appearance of the pump gives a fresh feeling. Noise, vibration big. Such as the H-150 spool valve pump, most of the domestic products to use anchor bolts, or because of vibration, pump crawling serious; fuel injection, oil spills. Serious pump failure, oil leakage after running, most of the products have this problem; stop the pump back to oil serious, resulting in difficult to start, so that the motor overload; poor stability, reliability, due to backward production and processing equipment, not only low production efficiency, and Poor interchangeability of parts, affecting the stability and reliability of the product. Diesel Plate Compactor,One Way Plate Compactor,Hand Held Plate Compactor,Gasoline Plate Compactor Shandong Storike Engineering Machinery Co., Ltd. , https://www.storikemachinery.com
In spite of this, domestic slide valve pump compared with foreign products there is still a big gap. Mainly as follows: