The Ministry of Industry and Information Technology will establish a public notice system for fuel consumption of light vehicles

The Ministry of Industry and Information Technology will establish a public notification system for fuel consumption of light vehicles. Starting from January 1, 2010, the Ministry of Industry and Information Technology will publicly release and regularly update data on vehicle fuel consumption indicators submitted by enterprises for the purpose of providing information for the public to understand, inquire, and retrieve vehicle fuel consumption. Information platform.
In accordance with the “Regulations on the Labeling of Fuel Consumption for Light Vehicles” issued by the Ministry of Industry and Information Technology, as of January 1, 2010, passenger cars and light commercial vehicles with a total mass of 3.5 tons sold in China are affixed with “Car Fuel Consumption Labeling”. Manufacturers or importers of automobile dealers must submit a sample of “Automotive Fuel Consumption Labeling” of different fuel consumption models to the Ministry of Industry and Information, and the Ministry of Industry and Information Technology will regularly publish light fuel consumption indicators for vehicles.
Media perspective: The introduction of the publicity system is in line with the needs of the entire society for energy conservation and emission reduction, so that consumers' vehicles can be more clearly understood.
Ministry of Finance: Vehicle Purchase Tax Relief The scope of passenger vehicles is unchanged. On December 23, 2009, the Ministry of Finance circulated the “Notice on the Reduction of Acquisition Taxes for Passenger Vehicles with Discharge Capacity of 1.6 Litres or Less”, which was clarified on January 1, 2010. From December 31 to December 31, passenger cars with 1.6 liters or less of displacement are temporarily deducted from the tax rate of 7.5% on a vehicle purchase tax. At the same time, it is clear that the range of passenger cars that enjoy preferential treatment is in line with the range of preferential tax policies for vehicle purchase in 2009.

Media perspective: In 2009, auto companies have tasted the sweetness of policy preferences. Although the policy has been reduced, the auto market is still worth the wait.
The revised draft of the "Automotive Industry Development Policy" will be formally launched in 2010. The Ministry of Industry and Industry of the Ministry of Industry and Information Technology has recently convened the heads of major automobile groups to Beijing to solicit opinions on the revised draft of the "Auto Industry Development Policy." The revised version is substantially revised from the current version and will be officially launched in the first half of 2010.
There have been many changes in the revised draft. First, specify the status and functions of the Ministry of Industry and Information Technology as the competent department of the automobile industry. Secondly, the revised draft adjusted or clarified some development goals, such as encouraging the export of automobiles led by self-owned brand cars, encouraging the development of new energy vehicles, and encouraging mergers and reorganizations to optimize the production capacity structure. The revised draft also places special emphasis on the specific quantitative targets for the introduction of overseas talent.
Media perspective: Keep pace with the times, adjust the policy according to the development of the Chinese market, and be generous.
The five ministries and commissions jointly issued the "Circular on Strengthening the Work Related to the Supervision and Administration of Scrap Vehicles"
In order to successfully implement the old-for-new vehicle replacement policy, a good market environment was created to prevent scrapped cars and assembled vehicles from flowing into society. Recently, the Ministry of Commerce, the Ministry of Public Security, the Ministry of Environmental Protection, the Ministry of Transport, the State Administration for Industry and Commerce and other five ministries jointly issued the "Notice on Strengthening the Supervision and Administration of End-of-Life Vehicles" in an effort to strengthen the supervision and management of end-of-life vehicles.
Media perspective: The joint issuance of the "Notice" shows the determination of various ministries and commissions in the supervision and management of end-of-life vehicles.

                                     


1.Our company produce  high quality products for small and medium plate, plate type, shell type, automobile connecting rod and the hydraulic valve and mold class of complex parts .realized the high precision, high efficiency,automatic , flexible, low cost and many other features.

2. features of machine

1)Basic part of the machine adopts special casting, useing of  Vertical Machining Center lathe bed and a sliding seat , so it has high rigidity structure. height from worktable to ground is also greatly reduced, it is more easy to operate  and loading and unloading workpiece for workers

 

2)The guide rail and the work table are quenching and grinding, plastic pate matched with the guide rail lubrication, automatic Intermittent lubrication , feeding smoothly without crawling, keeping good accuracy.


3)Machine tool with x/ yaxes both are the ball screw drive, connection mode for motor and screw is direct connection


4)The machine has the strong cutting, high flow rate of cooling, the width of the swarf discharging slot


5)Can be equipped with guangzhou cnc system .model 980MD . Three axis  are servo motor control mode.

 

Spindle box is full gear transmission structure, the max torque of the spindle is  350NM, spindle box can move up and down by manual.




MAIN SPECIFICATIONS

Items

Units

MAIN SPECIFICATIONS

ZK5140C

ZK5140B

ZK5150B

ZK5163C

ZK5180C

ZK51100

ZXK50

Table size

mm

1000×630

1000×545

1000×545

1000×545

1000×545

1100×1895

1000×545

Area of worktable

mm

850×500

850×400

850×400

850×400

850×400

700×800

850×400

Max. drilling dia

mm

φ40

φ40

Φ50

Φ63

Φ80

Φ100

Φ50

T-slot width×quantity

mm

18×5

18×3

18×3

18×3

18×3

22×3

18×3

Spindle taper hole

Mouse

4#

4#

5#

5#

6#

6#

4#

Spindle speeds

r/min

45-2000/12

45-2000/12

45-2000/12

40-570/9

40-570/9

61/80/110/138(4steps)

45-2000/(4steps auto)

Power of main motor

kw

3

3

3

5.5

5.5

15

3.7/5.5

Travel(X/Y/Z)

mm

700×500×240

850×400×240

850×400×240

850×400×240

850×400×240

600(Z)

850×500×600

Distance from spindle nose to worktable

mm

100-700

100-700

100-700

184-724

184-724

300-900

200-800

Distance from spindle center line to column

mm

500

335

335

375

375

480

445

Rapid travel rate X/Y/Z

m/min

15/15/4

15/15/4

15/15/4

15/15/1.3

15/15/1.3

Z:4

15/15/10

CNC control system

 

GSK

GSK

GSK

GSK

GSK

GSK

GSK

Position accuracy(X/Y)

mm

±0.025

±0.02

±0.02

±0.025

±0.025

±0.08(Z)

±0.02

Repeatability accuracy(X/Y)

mm

±0.02

±0.012

±0.012

±0.012

±0.012

±0.04(Z)

±0.012

Machine weight(N.W/G.W)

T

2.8/3.3

2.6/3.1

2.6/3.1

3/3.5

3/3.5

6/7

4/4.5

Overall dimensions(L×W×H)

mm

1820×1960×2250

1880×1590×2360

1880×1590×2360

1880×1590×2360

1880×1590×2360

1670×2570×3130

1880×2490×2850

Packing case(L×W×H)

mm

2100×2350×2800

2360×2490×2580

2360×2490×2580

2360×2490×2580

2360×2490×2580

2030×2750×3050

3360×2490×2880

 ZK5140B PICTURE ZK5180C


CNC Vertical Drilling Machine

CNC Vertical Drilling Machine,CNC Precision Drilling Machine,Automatic Vertical Drilling Machine,Complex Parts Drilling Machine

NingXia DaHe Machine Tool (Group) Imp And Exp Co.,Ltd , http://www.nxdhjcmachine.com