Technical Interpretation: Molten salt pump installation considerations
Molten salt pump installation precautions 1. Have good ventilation, to ensure that the motor and the molten salt pump fully heat. 2. The opening size of the mounting plate for the molten salt tank (tank) should be greater than or equal to the minimum body size of the molten salt pump as indicated on the installation dimension drawing. 3. The outlet flange of the molten salt pump is not allowed to withstand the external force and external torque, otherwise it may lead to different parts of the molten salt pump rotating parts and fixed parts affect the reliability and life of the pump or lead to molten salt pump can not operate normally, often cause: A molten salt pump vibration than normal; B rotor is difficult to rotate the rotor by hand. Therefore, the external piping system should be installed on the molten salt flange of the liquid outlet of the molten salt pump, and the liquid outlet pipe set screw on the pump base can not be adjusted freely. 4. Bearing bracket and bracket jacket cooling water pipes should be connected in parallel. 5. Molten salt pump to install ammeter to monitor pump operation. Introduction of Commercial Peanut Roaster Machine: Peanut Dryer,Peanut Dryer Tower,Peanut Dryer Machine,Tower Dryer For Peanut JINFENG DRYING EQUIPMENT CO.,LTD , https://www.jf-graindry.com
The machine is a horizontal drum roasting machine that uses direct fire for materials. It is composed of a horizontal drum boiler body, a pan support frame, a frying pan arch, a power transmission part, and a charging and discharging mechanism. The roller pot body is mounted on the support frame of the pot body through the bearing, and the roller pot body can rotate around the roller shaft. Under the direct fire action, the materials contained in the roller pot body are evenly baked, and the roller pot body is also heated evenly. The wok burst accident occurred. The upper part of the arch body adopts a detachable vault for easy maintenance and repair.
Use of Peanut Drying Equipment
The dryer machine is suitable for all roasted seeds and nuts, raw material processing of health products, processing of nutritious raw materials, processing of raw materials for Chinese herbal medicine shops, condiments and spices processing, dried coffee beans, chestnuts, peanuts, melon seeds, walnuts, sesame seeds, beans, rice, hazelnuts, pine nuts, pistachios and other dried fruit foods.
Advantages of Nuts Dryer Machine:
1. Roasting time can set up according to client need or material. When time is on, machine will warn.
2. Heating effect is uniform. Machine is constantly rotated. Back and forth, up and down, all heating well from different direction.
3. It can large increase roasting material oil squeezing rate. Usually equipped with oil press machine.
4. Roasting time is short. Each time it needs about 20minutes. Of course, different situation, roasting time will be a little different. For example, if you won't need the soybean skin crack, then 20 minutes is ok, if you will need the skin crack completely, then need about 40min one time.
5. Reasonable structure, low energy consumption, high efficiency, safety.
6. Low investment costs. Machine price is low, and have many models from small to large, customers can choose according to their needs.