Sales of crankshaft steel for trucks rose rapidly
Recently, news from Baosteel International North Company reported that in less than a year after entering the market, the sales volume of crankshaft steel for trucks from Baosteel climbed from tens of tons per month at the beginning of the year to more than 2,400 tons in October, a monthly increase from this year. The sales volume is the best level, and the cumulative sales volume in the previous ten months exceeded 10,000 tons, exceeding the full-year target. It is reported that the engine is the "heart" of the car and the crankshaft is the main rotating part of the engine. Because it needs to withstand a lot of torque, it has high requirements on strength and toughness, and its service life is a key technical indicator that determines the efficiency of the engine. In recent years, the demand for steel for automotive engine crankshafts has shown rapid growth in China. The new R&D work for steel crankshaft crankshafts used by Baosteel achieved a breakthrough at the end of last year, and it has a mass production capacity. In addition, Benxi Steel also vigorously promotes the development and development of engine crankshaft steel. In September of this year, 45 steel with a diameter of 155 mm crankshaft produced by Benxi Steel was put into the Steyr heavy-duty vehicle engine after being processed, marking that the special steel of Benxi Steel had been implanted in the “heart†of the heavy-duty vehicle. Sightseeing Elevator,Passenger Elevator,Panoramic Elevator Delfar Elevator Co., Ltd. , http://www.zjescalators.com