High-pressure vehicle cleaning sewage pipeline operation steps
High-pressure cars are mainly used for cleaning. They can be used by people because they can bring strong pressure. The sewers in cities need cleaning with help from high-pressure cars. They can effectively help the cleaning of sewage pipes. When using a high-pressure vehicle to help clean the sewage pipeline, it is necessary to grasp the relevant steps in order to complete the work faster and better. So, what is the operation procedure of the high-pressure vehicle cleaning sewage pipeline? High-pressure vehicle cleaning sewage pipeline operation steps 1. Before starting work, you need to adjust the throttle of the car to the mid-range speed: rotate the speed control knob clockwise and slowly. At this time, the discharge pipe speed is being adjusted, and you can rotate the reel handle to the “discharge†position. Then put the vehicle's flushing nozzle into the sewer that needs to be flushed. Remember to put it deeper before it can cause the water to spray out. 2, the vehicle adjusts the high pressure three-way handle on the "work", then the speed of the handle throttle to the maximum, the pump speed fully mobilized, it can wash the silt inside the sewage pipe are clean, the general side of the wash time Go ahead. 3, high-pressure vehicle cleaning can be based on the situation of the sewer pipeline to select the appropriate nozzle, to achieve different cleaning effects; for example, the sludge inside the sewage pipe is more, you can choose the nozzle in front of the hole; under normal circumstances with the first five Hole nozzle can be. 4. During the cleaning process, the spray head may be hindered from moving forward due to excessive silt rubbish. At this time, the roll handle can be moved up and down, and then the spray head can be pulled back and forth several times, which can effectively prevent the head from advancing. Substances can be eliminated, and the nozzles can continue to move forward smoothly; from a caisson to another caisson, it is necessary to be able to slow down the throttle. The main steps in the operation of high-pressure vehicle cleaning sewers are these. When cleaning other places, the overall steps for using high-pressure cars are much the same, and the actual operation needs to be determined according to specific operations.
Goodsense forklift new generation electric counter balance forklift advantages:
-load capacity of 3000kg, 3500kg,
-High-Strength Overhead Guard
-Famouse Shell Brand Hydraulic Oil
-ISO14001 Environmental Certification,All nuts use zinc clear.
-Korean KCC painting
-Wide view Mast
-Battery can be taken out easily(two way,From top and from side)
-LED lamp
-Curtis or Zapi AC controller
-Famous brand battery and charger
-Reasonable structure,better heat dissipation for controller
-Battery water automatic replenish for optional
-Powerful AC driving motor applied to reduce maintenance cost and increase the overall performance.
General
Model
FB30
FB35
Power Type
Electric
Electric
Load Capacity
kg
3000
3500
Load centre
mm
500
500
Tyre
Tyre
Pneumatic Tyre
Front:Pneumatic Tyre
Rear:Solid Tyre
Front Tyre
28×9-15-12PR
28×9-15-12PR
Rear Tyre
18×7-8-14PR
18×7-8(Solid tyre)
Overall Dimension
Lift Height
mm
3000
3000
Fork Size
L×W×T
mm
1070×125×45
1070×125×50
Mast Tilt Angle
F/R
.
6/12
6/12
Mast Lowered Height
mm
2115
2150
Mast Extended Height(with backrest)
mm
4175
4175
Length to face of fork(Without fork)
mm
2600
2600
Overall Width
mm
1230
1230
Overhead Guard Height
mm
2250
2250
Application Area:
1.Warehouse
2.Port
3.Factory
4.Distribution Center
5.Logistics
If you have any other questions,please contact us directly.Our forklift are all with high quality,and you can choose any other engine to equip.It can be produced according to your idea.And we invite you to visit our factory.
3.0-3.5Ton Electric Forklift,3.0Ton Electric Forklift,3.5Ton Electric Forklift ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , https://www.goodsenseforklift.com