Driving tanker in summer

When the tanker is running in summer, there is sometimes a case of sudden flameout. The reason is that the electronic ignition module is not only a problem. Some people have to ask why they have problems. In some areas, the summer temperature is too high, and the ignition module is broken down by heat, so it will turn off. So what should we do to deal with the problem of breakdown of the ignition module? Nothing good is to prepare a little more ignition module. If you have problems, you can change them yourself, but you must pay attention to the model of your tanker ignition module. Otherwise, it will not be used at all.

In the summertime, the air-conditioning system of the tanker should be inspected frequently, and the grid column should be cleaned up, and multiple air-conditioning systems should be regularly checked to prevent problems such as fluorine leakage. Of course, during the summer, you should also pay attention to the tire pressure of the tanker tires. It is easy to puncture the tires in summer. When parking, you should park the car in a cool place. When you drive, you must also prevent the car tires from heating up. After driving for a certain distance, you must stop the tires. Cooling treatment.

When driving, always pay attention to the temperature of the tanker engine. In some areas, the summer temperature is too high. If the cooling measures are not in place, it will cause a great burden on the engine and cause damage. Always check the remaining amount of coolant in the tanker to prevent the thermometer from bursting. If it is found that the water temperature is too high, it is necessary to stop the inspection and processing in time.

In the summer, due to the high ambient temperature and the fact that the heat is not easily dissipated, it is easy to produce carbon in the engine, or to form a gas barrier that obstructs the tubing. In severe cases, the refuelling vehicle engine may stop operating. How to use the gasoline label? This is determined by the compression ratio of the engine. Usually, the manufacturer will indicate the compression ratio and the matching gasoline number in the specification. The owner of the tanker should use the oil according to the label. The use of low-grade gasoline for a long period of time can cause abnormal combustion in the engine, resulting in phenomena such as knocking, fuel consumption, and inability to drive the refueling vehicle.

 

Gas Spring:

It consists of the following parts: pressure cylinder, piston rod, piston, sealing guide sleeve, filler (inert gas or oil and gas mixture), cylinder and cylinder control element the control element (of a controllable Gas Spring) and joint. Principle is in the closed pressure cylinder filled with inert gas or oil and gas mixture, the cavity is higher than atmospheric pressure several times or dozens of times, the cross-sectional area of the cross-sectional area of the piston rod is smaller than the piston to produce pressure difference to achieve the movement of the piston rod. Due to the different fundamental principle, the gas spring than ordinary spring has the advantages of obvious: speed is relatively slow, dynamic force changes little (within 1:1.2), easy to control.

The relative disadvantage is no small volume spiral spring, high cost, relatively short life. Unlike the mechanical spring, air spring has a nearly linear elastic curve. X between elastic coefficient of the gas spring 1.2 and standard 1.4, other parameters according to the requirements and conditions of flexible definition.

Category:

According to the characteristics and applications of different gas spring, also known as the supporting rod, air support, recliner, pressure rod, dampers etc. according to the structure and function of the gas spring to classify gas spring free type gas spring, self-locking gas spring, pull type gas springs, random stop gas spring, gas swivel chair spring damper, pressure rod,Self Locking Gas Spring,Auto Gas Spring,Industrial Gas Spring, Groove Gas Spring,Stretching Gas Spring,Office Furniture Gas Spring, etc.. Several products in the automotive, aerospace, medical equipment, furniture, machinery manufacturing and other fields have been widely used.

Structure and Function:

Gas spring is a kind of lifting spring can be labor-saving, can be divided into self locking gas spring (such as the bottom of the lifting seat backrest, boss chair, etc.) can not be self locking gas spring (lifting support such as car trunk, closet doors), the structure of the gas spring is mainly composed of a sleeve, a piston and a piston. Bar, with a high pressure air or high pressure nitrogen in the sleeve, due to the pressure difference between the ends of the piston area ranging, push the piston and piston rod movement and support people or objects.

How to Select the Right Gas Spring:

Quality evaluation of a gas spring quality mainly from the following aspects: first is the seal, if good sealing will appear in the process of using oil spills, leakage and other phenomena; second is the precision, such as the need to 500N the gas spring force, some manufacturers out of the error is not more than 2n, some manufacturers of the products may and the actual needs of the 500N is quite far; again the use of life, the life of its fully retractable count; the last is in the process of the force value change, gas spring under ideal condition should force values remain constant throughout the trip. But due to the factors of design and manufacture, the gas during the spring force value inevitably changes. But the magnitude of change is an important criterion to measure the quality of the gas spring, the magnitude of change is small, the better the quality of the gas spring, and vice versa Worse!

Gas Spring

Gas Spring,Stretching Gas Spring,Office Furniture Gas Spring,Lockable Gas Spring

VESTA Motoring Ltd , https://www.vesta-industry.com