The working principle and main advantages of multifunctional dust suppression car
The multifunctional dust suppression car is mainly used for dust removal in places such as iron, roads, dump trucks, city squares and bulk material piles. When trains and automobiles transport coal and ore, dust can be sprayed on the bulk materials of each vehicle to form a protective film and reduce pollution. Widely used in other bulk materials transportation process to prevent dust pollution and slag yard, coal storage yard, construction site, vehicle coal fly dust, sand fixation, steel building materials, cement, and other enterprises in the open pit ecological slope protection and other aspects. The spray distance of the multi-function spray dust suppression car is 60 to 100 meters, and the maximum water storage capacity is close to 13 tons. The main role is to suppress dust by spraying, and it also has sprinkler and road flushing functions, which can effectively suppress the generation of dust. The multi-function spray dust suppression vehicle is similar to an ordinary truck, but the dust suppression effect is very striking. Each device can control a purification area with a radius of 100 meters and the working efficiency is about 30 times that of ordinary sprinklers. Multifunctional spray dust suppression car dust suppression principle; multi-function spray dust suppression vehicle water atomization and dust particles of the size of the water droplets. Due to the similarity or the same size of the water droplets and the dust particles, the dust particles contact the water droplets to become wetter during operation. The wet dust particles absorb other particles and gradually coalesce into dust particles which settle under their own gravity. The multifunctional spray dust suppression vehicle is one of the urban air purification systems. It adopts a new type of technology (Brownian Diffusion) AOB® technology to control air pollution. It is more advanced and scientific after TVOC air purification technology and HEPA filtration technology. The new technology industry, which has lower energy consumption and significant purification effect, is based on the principle that the particles generated by the spray are used to suppress the dust in the air, thereby producing solid dust efficiency. Due to the small particles, the surface tension is basically zero, and when sprayed into the air, it can quickly adsorb particles in the air, effectively control the amount of dust, the effect of solid dust is obvious, the atomization effect is obvious, no water droplets and moisture are generated, and no The metal EQUIPMENT has the corrosive effect, protects the safety of the production equipment, the cost is low, the environmental protection is energy-saving, the installation is quick, the design is reasonable, the cost performance is higher. The working principle of the multifunctional spray dust suppression vehicle is to use high pressure to pressurize the water to 50-70 kilograms, and input through the pipeline to the atomizer device of the high pressure nozzle. The water in the path passes through the atomization device to form a mist that is floating in the air. The water mist can absorb fine dust and suspended particles in the air and humidify the atmosphere. The main advantages of multi-functional spray dust suppression car: 1. Professional industrial design, while satisfying the safety, reliability, convenience and performance indicators used, it is beautiful, fashionable, novel, and exquisite in craftsmanship. The air cylinder and the components are all sandblasted and then sprayed with two primers and a top coat. The paint is made of domestic well-known anti-corrosion paint. 2. High power conversion efficiency, long range, large coverage area, small and uniform mist particles, and good dust suppression effect. When the water mist comes in contact with dust floating in the air, it is adsorbed by the dust, increasing the proportion of dust, suppressing the flow of dust in the air, and accelerating the settlement of dust to achieve the purification of air. 3. The core control components PLC, switching power supply, emergency stop button and fault indicator are selected from the Japanese Izumi brand, and other parts and ACCESSORIES are selected from domestic famous brands to ensure the reliability of products and durability of use. 4. The main fan adopts well-known brand products of domestic listed companies and uses frequency converters for control to ensure the smooth running of the fan starter and reduce energy consumption. 5. The remote controller and receiver are selected by the top Swiss imported international, beautiful appearance and durability, to ensure that each control instruction is effective and accurate. The dust suppression vehicles mainly use the interaction between the hydraulic system and the electronic control system. That is, the mobile spray equipment injects the spray fluid into the liquid storage tank at the dispensing station and goes to the spraying point; when the train passes, the photoelectric detection system starts to identify the traction vehicle. After the traction locomotive passes, a signal is issued, and the control personnel controls the transmission hydraulic system to rotate the liquid pipe and the carriage body orthogonally, and at the same time, start the liquid pump to start spraying. And adjust the liquid pump flow to meet the design spray standard. The photoelectric detection system sends a signal to the PLC between the uncoupled gears of the train to control the stepping motor or the servo motor to stop spraying and spraying by rotating the shielding drum through the transmission connection device. When the train passes completely, the device stops spraying. A cruiser bicycle, also known as a beach cruiser, is a bicycle which combines balloon tires, an upright seating posture, a single-speed drive-train, and straightforward steel construction with expressive styling. Cruisers are popular amongst casual bicyclists and vacationers because they are very stable and easy to ride, but their heavy weight and balloon tires tend to make them rather slow. They are associated with the larger category of hybrid bicycles. Kids Beach Cruiser Bike, Lowrider Cruiser Bike, Children Beach Cruiser Bike Hangzhou Datasports Equipment Co.,Ltd(Oembicycle) , https://www.oembicycle.com
The bikes, noted for their durability and heavy weight, were the most popular bicycle in the United States from the early 1930s through the 1950s,[1] and have enjoyed renewed popularity since the late 1990s.
Schwinn developed the cruiser at a time when U.S. bicycle sales had declined sharply due to the Great Depression; adults purchased few bicycles, which were seen as luxury products intended largely for sport or recreation. In response, Schwinn conceived a sturdier, affordable bicycle designed for the more resilient youth market-originally marketing the Schwinn B-10 E Motorbike-which resembled a motorcycle but carried no motor-in 1933. Schwinn adapted features from the Henderson and Excelsior motorcycles his company had built during the 1920s, including a heavy "cantilevered" frame with two top tubes and 2.125-inch-wide (54.0 mm) "balloon" tires from Germany. The resulting bicycle could endure abuse that could damage other bicycles. Within two years, other bicycle manufacturers in the USA introduced competing balloon-tire bikes.
Cruisers' comfort, style, and affordability (compared to mountain and racing bikes) have led to renewed popularity in recent years In the early to mid-1990s, Schwinn produced a series of cruiser models, including the "Cruiser Deluxe" (which featured a Phantom-style tank with horn, chrome fenders, white-wall balloon tires, rear rack, a springer fork, and two-tone blue or green frames). The cruiser resurgence continued in 1995, when Schwinn reissued the Black Phantom to celebrate the company's 100th birthday. During that same time frame, similar offerings appeared from Columbia (a limited reissue of the classic 1950's 5-Star was produced in the early 1990s),[32]and Roadmaster.[33] Harley-Davidson even licensed a cruiser bike with their logo and trademark styling. These helped stir up interest in cruisers, which brought them to the attention of aging Baby Boomers, who remembered the originals from their youth and now were reaching an age where a comfortable bike was more exciting than a fast bike, and who also had the money to buy whatever they wanted. The classic "retro" looks, reliable mechanical performance, comfortable ride, and relatively low price of cruisers (compared to mountain bikes or road racers) also appealed to young Gen Xers.[5] Nearly every major bike manufacturer now offers at least one cruiser model, if not an entire line. Some notable contemporary manufactures include Electra Bicycle Company and Felt Bicycles. Cruiser sales have continued to rise over the past decade and today many towns have clubs sponsoring regular cruiser rides as a way to promote the low-tech, high fun aspect of cycling.
In 1934, Schwinn successfully re-styled the B-10E, renaming it the Aero Cycle. While the Aero Cycle featured no technical improvements over the original B-10E, its streamlined frame, faux gas tank, and battery-powered headlight came to define the cruiser 'look'.Modern cruiser bicycles retain these design elements.