Why Electronic Crane Scales Cannot Be Used For Long Periods
Piezo Jacquard is a type of electronic jacquard system used in warp knitting machines. It is a modern technology that uses piezoelectric sensors to control the warp yarns in the knitting process.
Overall, Piezo Jacquard is a valuable technology for warp knitting machines, allowing for greater creativity and precision in the production of high-quality knitted fabrics.
Piezo Jacquard,Piezoelectric Jacquard,Electronic Jacquard For Knitting Machine,Sap Card Of Jacquard suzhou cotex international Co.,Ltd , https://www.cotexmill.com
Here's why you don’t notice anything after booting:
1. When using a dry (accumulator) battery, check whether the voltage of the dry (accumulator) battery is sufficient. If the voltage is insufficient, replace the dry battery (battery, please charge);
2, using ADAPTOR who will be connected to the electronic scale ADAPTOR output pull out, and then install the battery, if you can boot, that is damaged ADAPTOR, need to be replaced;
3, the electronic hanging scale fuse is bad;
4, switch or button is damaged;
5, electronic crane scale does not work may also be a failure of electronic components.
Therefore, it is best not to use the electronic crane scale for a long time, so as to avoid damage to the electronic crane scale.
The piezoelectric sensors are placed on the needle bed of the machine and are used to detect the position of the warp yarns. This information is then sent to a computer, which controls the needle selection and knitting process.
The Piezo Jacquard system allows for greater flexibility and precision in the knitting process, as it can quickly and accurately adjust the needle selection to create complex patterns and designs. It also reduces the need for manual adjustments, saving time and improving overall efficiency.