Model NO.: XINRONG-32
Condition: New
Material: PVC Polyvinyl Chloride
Pipe Size Range: 16 to 32 mm
Operating Direction: From Right to Left
Center Height: 1000 mm
Machine Color: Xinrong Standard Color (White)
Cooling Water Consumption: 8 M3/H
Tank Volume: 12 M3
Compressed Air Consumption: 0.5 M3/Min
Total Power: 165kw
Actual Power When Operating: 100kw
Trademark: XINRONG
Specification: 10000*3000*2000
Origin: Jiangsu
HS Code: 8477200000
Model NO.: XINRONG-32
Condition: New
Material: PVC Polyvinyl Chloride
Pipe Size Range: 16 to 32 mm
Operating Direction: From Right to Left
Center Height: 1000 mm
Machine Color: Xinrong Standard Color (White)
Cooling Water Consumption: 8 M3/H
Tank Volume: 12 M3
Compressed Air Consumption: 0.5 M3/Min
Total Power: 165kw
Actual Power When Operating: 100kw
Trademark: XINRONG
Specification: 10000*3000*2000
Origin: Jiangsu
HS Code: 8477200000
PVC dual strands twin pipe extrusion line china manufacturer
This PVC dual strands twin pipe extrusion line china manufacturer can produce the pipe size 32mm. this 16-32 mm PVC dual strands twin pipe extrusion line china manufacturer is with big capacity, can produce UPVC pipes in high capacity. . The PVC dual strands twin pipe extrusion line china manufacturer pipe size is: 16-32mm diameter.
please check below machine pictures for your reference:
Material :Â Â Â Â Â Â Â Â Â Â Â Â Â Â UPVC (polyvinyl chloride)
Pipe size range:             Ø16~32mm
Operating direction: Â Â Â Â Â Â Â Â Â Â from right to left
Center height: Â Â Â Â Â Â Â Â Â Â Â Â Â 1000 mm
Machine color: Â Â Â Â Â Â Â Â Â Â Â Â Â Xinrong standard color (white)
Cooling water consumption:        8 m3/h  ( ≤20ºC,≥0.3MPa )  Â
Tank volume: Â Â Â Â Â Â Â Â Â Â Â 12 m3Â
Compressed air consumption: Â Â Â Â 0.5 m3/min ( >0.5MPa )
Total power: Â Â Â Â Â Â Â Â Â Â Â Â Â Â 165kW
Actual power when operating:Â Â Â Â Â Â 100kW
Overall dimension:            31000×3000×3000 mm
Control system: Â Â Â Â Â Â Â Â Â Â Â Â RKC temperature controller, JapanÂ
DC speed regulator: Â Â Â Â Â Â Â Â Â Â Eurotherm, U.KÂ
Inverter: Â Â Â Â Â Â Â Â Â Â Â ABB or BOSCH-REXROTH
Low voltage electrical parts   Â
Button, switch          Schneider, FranceÂ
Contactor            Schneider, France
Air switch            Schneider, FranceÂ
Intermediate relay        Schneider, France
Temperature controller       RKC, Japan
Heater              magal alloy ceramic heater
l   Circumstance:Â
Working place: Â Â Â Â Â Â Â Â indoors
Power supply: Â Â Â Â Â Â Â Â Â no dangerous area
Temperature:          0-40ºC
Humidity: Â Â Â Â Â Â Â Â Â Â Â 85% no condensation
Vaulted cover, no distortion. National patent for principal axis airproof device.Â
Self-friction or electric heating and steam heating function of the hot mixing.
•   Total capacity:            200/500 L
•   Effective capacity:           150/320 L
•   Vane rotation speed:          475/950/130 rpm
•   Motor heating power:          30/42/11 KW
•   Water consumption:          4 t/h
•   Heating method:            self-friction or electric heating
•   Discharge method:           pneumatic or manual
•   Dimension (L×W×H):          3000×1500×2000 mm
•   Mixing time:              10-12 min/pot
•   Cooling time:             10-12 min/pot
•   Screw, barrel:              38CrMoAlA, nitriding and polishing,                                  depth of nitriding: 0.45-0.65mm,                                     surface hardness HV800-900;                                     with vacuum exhaust device,                                       vacuum exhausting power: 2.2 kW
•   Sensor:              PT131B, 50MPa; power 24V, output 0-10VÂ
•   Screw diameter:          65/132 mm
•   Screw rotation direction:        different direction outwardly
•   Drive motor power:            37 kW, AC motor
•   Inverter                 ABB or BOSCH-REXROTH
•   Quantitive feeding motor:       0.75 kW (AC motor )
•   Capacity Max:             ≈250 kg/h (PVC material, vary with different                            recipe and pipe size)
•   Vertical gearbox:             high torque, low noise, hard gear face                                 special gearbox for extruder;                                        Material of box: HT200 with tempering;                               Material of gear: 20GrMnTi with                                     carburizing ,quenching and grinding
•   Lubrication system:           circulating oil enforced by oil pump; infiltration                            and splash in oil basin
•   Barrel heating power:          21.4 kW
•   Barrel cooling power:          3×0.25 kW  enforced air cooling
Features:
   Four strand design can produce four pipes at one time which can increase efficiency greatly.
   Technical parameter
   Die material:              40Cr, forgings with tempering treatment
   Bolt grade:               12.9 grade high strength bolt
   Flow channel surface:        chroming and mirror polishing
   Pipe range:           Ø16~32mm
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                            Â
•   Center height:          1000 mm
•   Tank material:           stainless steel
•   Tank length:           4000 mm
•   Vacuum degree:          0~0.06MPa (adjustable)
•   Vacuum pump:          2.2 kW Â
•   Water pump:           3.0 kW
•   Moving motor:           0.75 kW
•   Cooling method:            immersion
•   Adjust range of forward and backward:        ±400 mm
•   Adjust range of up and down:           ±50 mm
•   Adjust range of left and right:             ±50 mm
Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
       Technical parameter                         Â
•   Quantity of belts:            8pcs
•   Effective length:         1000 mm
•   Max. Hauling force:        6000 N.m
•   Hauling speed:          1-10 m/min
•   Clamping type:          pneumaticÂ
•   Hauling motor:           4×0.55 kWÂ
•   Control method:          ABB or BOSCH-REXROTH
       For cutting part
       Technical parameter                           Â
•   Cutting type:            knife cutting
•   Clamping type:           pneumatic
•   Workbench moving method:      pneumatic
•   Cutting range:           Ø16~32mm
•   Cutting motor:              4×0.25 kW
•   Control method:            Siemens PLC controllerÂ
•   Motor power:            4kW
•   Feeding port size:         240× 350mm
•   Rotor diameter:            Ø200mm
•   Rotating speed:            650rpm
•   Rotating blades:            3pcs
•   Fixed blades:            2pcs
•   Blade material:            Cr12MoV
•   Protection:               overload emergency stop
•   Crushed material size:       <=8mm
•   Capacity:               50-100kg/h
we can show you machine running anytime. Welcome to our factory for visiting.Â
Besides, i can send some machine running vidoes for your reference.
PVC dual strands twin pipe extrusion line china manufacturer
This PVC dual strands twin pipe extrusion line china manufacturer can produce the pipe size 32mm. this 16-32 mm PVC dual strands twin pipe extrusion line china manufacturer is with big capacity, can produce UPVC pipes in high capacity. . The PVC dual strands twin pipe extrusion line china manufacturer pipe size is: 16-32mm diameter.
please check below machine pictures for your reference:
Material :Â Â Â Â Â Â Â Â Â Â Â Â Â Â UPVC (polyvinyl chloride)
Pipe size range:             Ø16~32mm
Operating direction: Â Â Â Â Â Â Â Â Â Â from right to left
Center height: Â Â Â Â Â Â Â Â Â Â Â Â Â 1000 mm
Machine color: Â Â Â Â Â Â Â Â Â Â Â Â Â Xinrong standard color (white)
Cooling water consumption:        8 m3/h  ( ≤20ºC,≥0.3MPa )  Â
Tank volume: Â Â Â Â Â Â Â Â Â Â Â 12 m3Â
Compressed air consumption: Â Â Â Â 0.5 m3/min ( >0.5MPa )
Total power: Â Â Â Â Â Â Â Â Â Â Â Â Â Â 165kW
Actual power when operating:Â Â Â Â Â Â 100kW
Overall dimension:            31000×3000×3000 mm
Control system: Â Â Â Â Â Â Â Â Â Â Â Â RKC temperature controller, JapanÂ
DC speed regulator: Â Â Â Â Â Â Â Â Â Â Eurotherm, U.KÂ
Inverter: Â Â Â Â Â Â Â Â Â Â Â ABB or BOSCH-REXROTH
Low voltage electrical parts   Â
Button, switch          Schneider, FranceÂ
Contactor            Schneider, France
Air switch            Schneider, FranceÂ
Intermediate relay        Schneider, France
Temperature controller       RKC, Japan
Heater              magal alloy ceramic heater
l   Circumstance:Â
Working place: Â Â Â Â Â Â Â Â indoors
Power supply: Â Â Â Â Â Â Â Â Â no dangerous area
Temperature:          0-40ºC
Humidity: Â Â Â Â Â Â Â Â Â Â Â 85% no condensation
Vaulted cover, no distortion. National patent for principal axis airproof device.Â
Self-friction or electric heating and steam heating function of the hot mixing.
•   Total capacity:            200/500 L
•   Effective capacity:           150/320 L
•   Vane rotation speed:          475/950/130 rpm
•   Motor heating power:          30/42/11 KW
•   Water consumption:          4 t/h
•   Heating method:            self-friction or electric heating
•   Discharge method:           pneumatic or manual
•   Dimension (L×W×H):          3000×1500×2000 mm
•   Mixing time:              10-12 min/pot
•   Cooling time:             10-12 min/pot
•   Screw, barrel:              38CrMoAlA, nitriding and polishing,                                  depth of nitriding: 0.45-0.65mm,                                     surface hardness HV800-900;                                     with vacuum exhaust device,                                       vacuum exhausting power: 2.2 kW
•   Sensor:              PT131B, 50MPa; power 24V, output 0-10VÂ
•   Screw diameter:          65/132 mm
•   Screw rotation direction:        different direction outwardly
•   Drive motor power:            37 kW, AC motor
•   Inverter                 ABB or BOSCH-REXROTH
•   Quantitive feeding motor:       0.75 kW (AC motor )
•   Capacity Max:             ≈250 kg/h (PVC material, vary with different                            recipe and pipe size)
•   Vertical gearbox:             high torque, low noise, hard gear face                                 special gearbox for extruder;                                        Material of box: HT200 with tempering;                               Material of gear: 20GrMnTi with                                     carburizing ,quenching and grinding
•   Lubrication system:           circulating oil enforced by oil pump; infiltration                            and splash in oil basin
•   Barrel heating power:          21.4 kW
•   Barrel cooling power:          3×0.25 kW  enforced air cooling
Features:
   Four strand design can produce four pipes at one time which can increase efficiency greatly.
   Technical parameter
   Die material:              40Cr, forgings with tempering treatment
   Bolt grade:               12.9 grade high strength bolt
   Flow channel surface:        chroming and mirror polishing
   Pipe range:           Ø16~32mm
Vacuum tank is used to shape and cool pipe, so as to reach standard pipe size. Its shape is advanced foreign anti-deformation structure. The pipeline adopts the design of double loop pipeline, realizing non-stop pipeline clean and function of temperature control.
Technical parameter                            Â
•   Center height:          1000 mm
•   Tank material:           stainless steel
•   Tank length:           4000 mm
•   Vacuum degree:          0~0.06MPa (adjustable)
•   Vacuum pump:          2.2 kW Â
•   Water pump:           3.0 kW
•   Moving motor:           0.75 kW
•   Cooling method:            immersion
•   Adjust range of forward and backward:        ±400 mm
•   Adjust range of up and down:           ±50 mm
•   Adjust range of left and right:             ±50 mm
Features:
 Its structure with sliding door is beautiful and practical. Traction device with belt and controlled by inverter can steadily haul pipe. It also features compact structure and free-maintenance.
Clamping force can be adjust by vernier device to prevent deformation of pipe. Adopt special automobile drive shaft to transmit power, stable and reliable. Length measuring device equipped with a rotary encoder, can ensure precise cutting.
       Technical parameter                         Â
•   Quantity of belts:            8pcs
•   Effective length:         1000 mm
•   Max. Hauling force:        6000 N.m
•   Hauling speed:          1-10 m/min
•   Clamping type:          pneumaticÂ
•   Hauling motor:           4×0.55 kWÂ
•   Control method:          ABB or BOSCH-REXROTH
       For cutting part
       Technical parameter                           Â
•   Cutting type:            knife cutting
•   Clamping type:           pneumatic
•   Workbench moving method:      pneumatic
•   Cutting range:           Ø16~32mm
•   Cutting motor:              4×0.25 kW
•   Control method:            Siemens PLC controllerÂ
•   Motor power:            4kW
•   Feeding port size:         240× 350mm
•   Rotor diameter:            Ø200mm
•   Rotating speed:            650rpm
•   Rotating blades:            3pcs
•   Fixed blades:            2pcs
•   Blade material:            Cr12MoV
•   Protection:               overload emergency stop
•   Crushed material size:       <=8mm
•   Capacity:               50-100kg/h
we can show you machine running anytime. Welcome to our factory for visiting.Â
Besides, i can send some machine running vidoes for your reference.
Cargo Trolley
Our worldwide approved transport trolleys solving your in-house heavy load standards - safe and perfect!
Series F and L – the perfect 3-point moving solution for safe and simple transport. F trolleys – the rear axle of the load moving system with adjustable connecting bar to fit under heavy loads of almost any width. L trolleys– the front steering support with swivel top and tow eye to guide your loads safely. Wheels - special PU wheels, that do not mark floors. Low rolling resistance and highest stability for numerous uses.
Specification
|
Model
|
max.capacity
|
capacity
|
No.of wheel
|
wheel material
|
size of wheel MM
|
overall size MM
|
N.W(KG)
|
|
CRB6
|
6T
|
3T
|
4
|
PU
|
80X70
|
300X225X110
|
15
|
|
CRB8
|
8T
|
4T
|
6
|
PU
|
80X70
|
400X225X110
|
21
|
|
CRB12
|
12T
|
6T
|
8
|
PU
|
80X70
|
500X225X110
|
30
|
|
CRB15
|
15T
|
7T
|
9
|
PU
|
80X70
|
400X313X110
|
32
|
|
CRB18
|
18T
|
9T
|
12
|
PU
|
80X70
|
500X313X110
|
43
|
|
CRB24
|
24T
|
12T
|
16
|
PU
|
80X70
|
550X380X115
|
65
|
|
Model
|
|
No.of Wheels
|
Length of handle adjusting(mm)
|
Overall Size:(Length *Width*Height)
|
Capacity
(Ton)
|
N.W.
(KG/PG)
|
|
X4+Y4
|
X4
|
4
|
800
|
230*230*110
|
8
|
31
|
|
Y4
|
4
|
300-1000
|
170*140*110
|
|
X8+Y8
|
X8
|
8
|
1100
|
560*420*110
|
16
|
76
|
|
Y8
|
8
|
400-1300
|
200*200*110
|
|
X12+Y12
|
X12
|
12
|
1100
|
750*450*110
|
24
|
106
|
|
Y12
|
12
|
400-1400
|
256*200*110
|
|
X16+Y16
|
X16
|
16
|
1100
|
936*500*110
|
32
|
132
|
|
Y16
|
16
|
400-1500
|
310*220*110
|
|
X18+Y18
|
X18
|
18
|
1500
|
780*500*110
|
36
|
148
|
|
Y18
|
18
|
400-1500
|
300*250*110
|
|
X24+Y24
|
X24
|
24
|
1500
|
1000*580*120
|
48
|
200
|
|
Y24
|
24
|
400-1600
|
360*315*120
|
|
X32+Y32
|
X32
|
32
|
1500
|
1080*720*140
|
64
|
312
|
|
Y32
|
32
|
500-1200
|
460*315*10
|
FAQ
-When will I contact you?
-We are online 24 hours a day.
-How can I contact you?
-You can contact me on Alibaba or WHATSAPP +8613930810918
-What advantage we have?
-Provide factory direct price will save your cost than buy from third party.
-How to place an order?
-Tell us your detail requirements (Load capacity, lifting height etc) by Email or on Trademanager or WHATSAPP. We will send your our offer in 24 hours. Please send us your purchase order or you can ask us to send you a proforma invoice for your order.
-Can you add our own logo on the products or use our designs?
-Yes, of course. You can add logo on our products! We provide OEM/ODM service. In addation, we promise your design would protect by law, we won't tell anyone else about this, It's your own copyright.
Cargo Trolley
Cargo Trolley,Cargo Trolley For Wheels,Cargo Trolley Airport,Cargo Hand Trolley
Hebei Huaige Hoisting Machinery Group Co., Ltd. , http://www.liftinghoistfactory.com