Backpacks flew to the sky to fly for 7.5 million Taiwan dollars

Did the flight backpack in science fiction movies finally come true? New Zealand’s Martin Aircraft Company announced yesterday that the company has obtained a flight licence issued by the New Zealand government and will be the first manned flight test flight bag. Martin Aircraft hopes to begin selling this flying backpack next year and promote it to the general public so that most people can wear backpacks and fly to the sky.
Martin Aircraft plans to start selling professional flying backpacks next year. Its targets are police emergency personnel. The price is between NT$4.5 million and RMB7.5 million. It hopes to introduce a simplified civilian version in 2015.
Peter Coker, CEO of Martin Aircraft, said: "This is an important step for us. The dream in my heart is about to come true and it will soon become a commercial product." The license issued by the New Zealand government restricts Martin's flying backpack from leaving the ground. 6 meters or a height less than 7.62 meters above the water and can only be tested in unmanned areas. In May 2011, Martin used a dummy to wear a flying backpack and remotely fly to a height of 1,500 meters.
Flying backpack is the dream product of the inventor Glenn Martin. He is also chairman of Martin Aircraft Corporation. He has been researching flying backpacks that can be easily manipulated by ordinary people since the 1980s. The flying backpack is quite simple in structure. It can be said that it is only a device with two big fans linked together. It is equipped with a parachute, but it is very difficult for the flying backpack to handle it easily.

Silicone Rubber Mould

Silicone mould is a special mold for making crafts. According to performance, the raw materials of glue can be divided into ordinary silicone and weather silicone. The characteristics of silicone are high temperature resistance, corrosion resistance, strong tear resistance, high simulation precision, and it is used to make various handicrafts mold.

Mold should be made in time after the silicone is matched. Pour the glue on the highest part of the mold in a trickle, let it flow naturally, brush it in place with an oil paintbrush where the flow is not in place, if it is a piece of silicone, not only fill the entire product, but also brush the glue evenly. Each product should be brushed with at least three layers of silicone. The thickness of each layer of silicone is 1mm. In the process of brushing the silicone, each layer is required to be cured before the other layer can be brushed. When brushing the third layer, add one layer on top of the second layer. The thickness of the silica gel part of the whole mold is controlled in 3-4mm according to the different requirements of the size of the product, and the width is not greater than 60 mm of the product width. The time for the silicone to set is 20 minutes.

Silicone Mould

Silicone Injection Molding, Moulding Silicone, Rubber Molds, Rubber Mold Making

Sung Precision Mould & Plastic Co., Ltd. , https://www.gdinjectionmolding.com