The concentrator was successfully developed by the North Mining Institute in the late 1980s. It is an advanced new-generation centrifugal mineral re-selection patented equipment, which is exclusively produced and distributed by the institute.
The machine is formed by centrifugal sedimentation force, Bagnold force and strong impact force to form a unique jet flow film beneficiation process. It has special sorting effect on fine and ultrafine materials, and has a continuous selection of all products. The function of discharging. Its structure and dimensions are shown in the figure below. The tangential direction of the slurry gives the surface of the drum. Due to the large centrifugal force, the distribution of the annulus can be formed rapidly on the surface of the drum. Under the impact of the high-pressure water jet, dynamic hydrodynamic enthalpy can be formed on the surface of the drum, and deposition, looseness and redeposition can occur instantaneously. The loose centrifugal film jigging process ensures the sorting and recovery of fine-grained minerals, and pushes the heavy minerals uphill, and the light minerals turn over the hydraulics and down the slope, and the whole product is continuously discharged in the opposite direction. Centrifuge wear replaceable wear parts using non-metallic liner embodiment, the replacement is easy, long life, low cost, and corrosion resistant. At present, more models are being developed.
In combination with the SL-type jet centrifugal concentrator, a set of automatic control system with simple structure, low price and easy operation and maintenance has been developed, which makes the machine more automatic, easy to operate and stable in production.
There are currently 3 specifications and their technical parameters are listed in the table below. In addition, it can be specially designed and manufactured according to the special requirements of users. Please specify the parameters of the ore to be processed when ordering.
Adjusting the selection parameters, the equipment has good sorting effect on the slime of -74~+10μm and -10μm, and the lower limit of the recovery particle size is 1~3μm, which can replace the original intermittent ore-type centrifugal concentrator or part. It replaces the mud shaker and can handle the -19μm fine-grained boring mud, old tailings and other industrial powder materials that can not be recovered by the previous selection process. Compared with some new mineral re-election equipments in foreign countries, the equipment has lower recovery particle size lower limit, higher enrichment ratio, lower price, international leading level and good promotion prospects. Can be used in a variety cassiterite, niobium, tantalum, tungsten ore, rare earth, clay, gold, iron ore, artificial diamond, etc. have a certain difference in the density of the sludge separation.
   Figure  table
InnoColor 2K Epoxy Primer
Professional Epoxy Primer manufacturer is located in China, including Epoxy Surfacer,Automotive Epoxy Primer,Fast Drying Epoxy Primer, etc.
2K Epoxy Primer,2K Epoxy Surfacer,2K Automotive Epoxy Primer,Fast Drying Epoxy Primer
WONDER COATING TECHNOLOGY CO., LTD. , https://www.innocolor-paint.com