BAODING HUAYUE RUBBER BELTS CO., LTD
Baoding Huayue Rubber Belts Co., Ltd is one of the top 10 conveyor belt manufacturers in China. With over 800 staff members, the company has a registered capital of 200 million RMB and an annual production capacity of 30 million square meters.
MAIN PRODUCTS
- EP Conveyor Belt
- Nylon Conveyor Belt
- Canvas Conveyor Belt
- Steel Cord Conveyor Belt
- Sidewall Conveyor Belt
- Fire Retardant (PVC, PVG) Conveyor Belt
- Heat Resistant Conveyor Belt
- Cold Resistant Conveyor Belt
- Oil/Acid/Alkali Resistant Conveyor Belt
- Special Pattern (Chevron) Conveyor Belt
- Conveyor Idler/Roller
- Conveyor Frame/Bracket
- Head Pulley/Tail Pulley
GENERAL SPECIFICATION
- Layer: 1-10 ply
- Width: 400-2200mm
- Thickness: 3-30mm
STANDARDS
DIN22102, RMA, AS1333, AS1332, DIN22109, DIN14890, DIN22102, ISO22721, ISO3684, SANS1173, SANS1366, SANS971, JISK6322, BS3289, ISO14890
WHOLE CORE FLAME RESISTANT CONVEYER BELT (PVC/PVG TYPE)
This type of conveyor belt is divided into two categories: PVC and PVG.
- PVC conveyor belts have a top and bottom layer of PVC coating cover, with a single-sided tape thickness ≥1.0mm and slope angle <16°.
- PVG conveyor belts have nitrile rubber and PVC on the upper and lower layers, with a single-sided tape thickness of 1-3mm and slope angle <20°.
Structure: Made from the whole core via dipping and plastifying in polyvinyl chloride (PVC) dipping agent or sulfuration. It is fire retardant, ant-static, shock resistant, abrasion resistant, and corrosion resistant.
Application: Used for underground well haulage in coal mines and material conveyance in metallurgical and chemical industries.
TECHNICAL DATA
| PVC |
Standard MT914-2008 |
Safety Coefficient 10 (Break Strength × 1/10) |
| Slope Angle <16° |
| PVG |
Standard MT914-2008 BS3289 HG2805 |
| Slope Angle <20° |
| Standard Type |
Grade |
Break Strength≥, N/mm |
Elongation at Break % |
Advising Min Dia. of Transmission Drum (mm) |
| Longitudinal |
Horizontal |
Longitudinal |
Horizontal |
PVC |
PVG |
| 680S |
4 |
600 |
265 |
≥15% |
≥18% |
320 |
400 |
| 800S |
5 |
800 |
280 |
400 |
500 |
| 1000S |
6 |
1000 |
300 |
500 |
630 |
| 1250S |
7 |
1250 |
350 |
500 |
750 |
| 1400S |
8 |
1400 |
350 |
630 |
750 |
| 1600S |
9 |
1600 |
400 |
1000 |
1000 |
| 1800S |
10 |
1800 |
400 |
1000 |
1000 |
| 2000S |
11 |
2000 |
400 |
1250 |
1250 |
| 2240S |
12 |
2240 |
450 |
1250 |
1250 |
| 2500S |
13 |
2500 |
450 |
1400 |
1400 |
STEEL CORD CONVEYER BELT
General Steel Cord Conveyer Belt
It uses the new type steel cord as the tear-resistant element. It has high tension strength, small elongation, excellent troughability, and high flexibility, and it is applicable for the conveyance of materials with long distance, large freight volume, and high speed.
Tear Resistant Steel Cord Conveyor Belt
On one side or two sides vertical that is perpendicular to the lengthways steel cable, evenly lay the reinforcing layer of the steel cable, steel cord, fabric, etc. It has excellent impact and tearing resistance performance.
Tear Resist Belt With Detector
It uses the new type steel cord as the tear-resistant element. Between the steel cord conveyor belts' core rubber and bottom cover, build in the phase shift sensor (coil) at a certain distance lengthways.
It gives out an alarm and stops running automatically whenever a tearing of the belt is detected, or the belt runs abnormally and reaches the preset off speed.
Technical Data
| Technical Data |
Belt Strength |
ST/S
630 |
ST/S
800 |
ST/S
1000 |
ST/S
1250 |
ST/S
1600 |
ST/S
2000 |
ST/S
2500 |
ST/S
2800 |
ST/S
3150 |
ST/S
3500 |
ST/S
4000 |
ST/S
4500 |
ST/S
5000 |
ST/S
5400 |
| Longitudinal Tensile Strength (N/mm) |
630 |
800 |
1000 |
1250 |
1600 |
2000 |
2500 |
2800 |
3150 |
3500 |
4000 |
4500 |
5000 |
5400 |
| Max Nominal Dia. of Steel Cord (mm) |
3.0 |
3.5 |
4.0 |
4.5 |
5.0 |
6.0 |
7.2 |
7.5 |
8.1 |
8.6 |
8.9 |
9.7 |
10.9 |
11.3 |
| Steel Cord Pitch (mm) |
10 ±1.5 |
10 ±1.5 |
12 ±1.5 |
12 ±1.5 |
12 ±1.5 |
12 ±1.5 |
15 ±1.5 |
15 ±1.5 |
15 ±1.5 |
15 ±1.5 |
15 ±1.5 |
16 ±1.5 |
17 ±1.5 |
17 ±1.5 |
| Thickness of Top Cover (mm) |
5 |
5 |
6 |
6 |
6 |
6 |
8 |
8 |
8 |
8 |
8 |
8 |
8.5 |
9 |
| Thickness of Bottom Cover (mm) |
5 |
5 |
6 |
6 |
6 |
6 |
8 |
8 |
8 |
8 |
8 |
8 |
8.5 |
9 |
| Width (mm) |
Numbers of Steel Cord |
| 800 |
75 |
75 |
63 |
63 |
63 |
63 |
50 |
50 |
50 |
50 |
|
|
|
|
| 1000 |
95 |
95 |
79 |
79 |
79 |
79 |
64 |
64 |
64 |
64 |
64 |
59 |
55 |
55 |
| 1200 |
113 |
113 |
94 |
94 |
94 |
94 |
76 |
76 |
76 |
76 |
76 |
71 |
66 |
66 |
| 1400 |
133 |
133 |
111 |
111 |
111 |
111 |
89 |
89 |
89 |
89 |
89 |
84 |
78 |
78 |
| 1600 |
151 |
151 |
126 |
126 |
126 |
126 |
101 |
101 |
101 |
101 |
101 |
96 |
90 |
90 |
| 1800 |
171 |
171 |
143 |
143 |
143 |
143 |
114 |
114 |
114 |
114 |
114 |
109 |
102 |
102 |
| 2000 |
196 |
196 |
159 |
159 |
159 |
159 |
128 |
128 |
128 |
128 |
128 |
121 |
113 |
113 |
| 2200 |
216 |
216 |
176 |
176 |
176 |
176 |
141 |
141 |
141 |
141 |
141 |
134 |
125 |
125 |
| The Recommended Minimum Pulley Diameter |
| ST Belt Type |
ST/S
630 |
ST/S
800 |
ST/S
1000 |
ST/S
1250 |
ST/S
1600 |
ST/S
2000 |
ST/S
2500 |
ST/S
2800 |
ST/S
3150 |
ST/S
3500 |
ST/S
4000 |
ST/S
4500 |
ST/S
5000 |
ST/S
5400 |
| Minimum Pulley Diameter (mm) |
500 |
500 |
630 |
800 |
1000 |
1000 |
1250 |
1250 |
1400 |
1600 |
1600 |
1600 |
1800 |
1800 |
German Series wash pump
German Series Wash Pump,German Series Washer Pump,German Series Windshield Wash Pump,Washer Fluid Pumps
ruian city yixuan auto parts co.,ltd , https://www.yixuanauto.com