Use Fot Truck and Cars Wheel Balancer, Also for Exporting
Describe:
The line strainers should be installed the upstream shutoff valve and the inlet the backflow preventer .The line filters are installed on the pressure line of the hydraulic system to filter out the mechanical impurities mixed in the hydraulic oil and the colloid, leachate, carbon residue, etc., resulting from the chemical changes of the hydraulic oil itself, so as to prevent the valve core from getting stuck. The clogging of slot and damping hole in throttle hole and the breakage of hydraulic components. The filters have good filtering effect and high precision, but it is difficult to clean after clogging, and the filter elements should be replaced.
Characteristics:
The line filters are especially suitable for automatic control systems and servo systems. It can prevent high precision control elements and actuators from being worn out or jammed too early because of pollution, thus reducing the failure and prolonging the service life of the components. The filter adopts imported fiberglass Filter Material, which has the advantages of high filtration precision, strong oil flow ability, small original pressure loss and large amount of sewage.
Product types:
1. LPF series: Low pressure line filters
2. MPF series: Med-pressure line filters
3. HPF series: High pressure line filters
Line Filters Line Filters,Wedge-Shaped Filament Filter,Power Line Filter,Line Emi Filter Henan Sinofiltec Technology Co.,Ltd , https://www.airfilters.pl
Rim diameter:10"-26"
Max. tire diameter: 1200mm
Tire width:4"-16"
Max. tire weight:150kg
Spindle speed: 190r/min
Balance precision: ±1g
Motor: 110V/220V 250W
Machine weight: 280kgÂ
Application range:
This product makes fine adjustment for tyres of various light vehicles.
Machine functions:
1.It can realize automatic dynamic balance, static balance and aluminum alloy rim balance.
2.Adopting pressure sensor,pressure datas show high precision.
3.The protective cover is optional.
Machine quality:
This product gained Europe CE certification. 
Â
Technical parameters:
Rim diameter:10"-26"
Max. tire diameter: 1200mm
Tire width:4"-16"
Max. tire weight:150kg
Spindle speed: 190r/min
Balance precision: ±1g
Motor: 110V/220V 250W
Machine weight: 280kgÂ
Application range:
This product makes fine adjustment for tyres of various light vehicles.
Machine functions:
1.It can realize automatic dynamic balance, static balance and aluminum alloy rim balance.
2.Adopting pressure sensor,pressure datas show high precision.
3.The protective cover is optional.
Machine quality:
This product gained Europe CE certification.Â
Â
