Model NO.: Yg6X Yg6 Yg8 Yg10 Yg15 etc
Color: Yello/Grey
Usage: Tile Cutting
Types: Hand Tool
Life: 2500m Cutting Ife
Trademark: ZZ HARDMETAL
Transport Package: Export Standard Packaging
Specification: metal
Origin: Zhuzhou
Feature points:
1.Good cutting effect with high precision linear and margin smooth.
2. High quality tungsten carbide as taw material, higher hardness, longer life(over 2500m).
3. Using easier and  'greener'. No need electricity and water, no noise, no dust.
4. Available for customized size.
Â
| Grade |
Cutting length |
Density |
Hardness |
T.R.S |
| For common title |
g/cm3 |
HRA |
MPa |
| A01 |
500m |
13.8-14.2 |
91.2 |
1700 |
| A02 |
300m |
11-11.3 |
91 |
1600 |
| A03 |
100m |
9-9.4 |
92 |
1200 |
| A04 |
600m |
14.6-15.1 |
91.5 |
1800 |
Grades:
YG8 and YS2TÂ are widely used for making carbide cutting disc. But other size can be offered by your requirement.
Grade properties:
YG8:High strength in use, impact and shock resistance higher than YG6, but wear resistance and cutting speed comparatively lower. Roughing of cast irons, non-ferrors metals and their alloys as well as non metallic materials at low cutting speed.
YS2T: Fine grade alloy, with high wear resistance, high bending strength, high resistance to bonding, high thermal strength. Machining of refractory alloys, stainless steel and high manganese steel, etc.
Feature:Â
1. Do not need water or electricity, no powder created or noise pollution, safe and healthy and environmental protection.Â
2. Cutting speed is 10 times higher than electrical cutter, but cutting cost is 1/10 less than the electrical cutter.Â
3. High cutting precision, no waste, lower cost, helpful for joint.Â
4. Since high quality polishing tiles are rigid, the common electrical cutters always break down the edge during cutting. But our Tile Cutter can cut tiles with smooth cutting edge because it lines and margin smooth
Â
| TYPE |
OD tolerance |
OD |
ID tolerance |
I) |
Height tolerance |
H |
 angle |
HSSC-1 |
HSSC-2 |
HSSC-3 |
HSSC-4 |
| Φ22×Φ14×5.0 |
±0.05 |
22 |
+0.01~+0.08 |
14 |
+0~-0.02 |
5 |
90°100° 110° 120° |
2000 |
1000 |
400 |
150~200 |
| Φ22×Φ14×2.6 |
22 |
14 |
2.6 |
| Φ22×Φ14×2.0 |
22 |
14 |
2 |
| Φ22×Φ13×2.0 |
22 |
13 |
2 |
| Φ22×Φ12×2.2 |
22 |
12 |
2.2 |
| Φ22×Φ10.5×2.0 |
22 |
10.5 |
2 |
| Φ22×Φ6×4.6 |
22 |
6 |
4.6 |
| Φ22×Φ6×2.0 |
22 |
6 |
2 |
| Φ18×Φ6×3.0 |
18 |
6 |
3 |
| Φ18×Φ6×3.8 |
18 |
6 |
3.8 |
| Φ16×Φ6×4.9 |
16 |
6 |
4.9 |
| Φ16×Φ6×3.0 |
16 |
6 |
3 |
| Φ16×Φ6×2.0 |
16 |
6 |
2 |
| Φ16×Φ6×1.5 |
16 |
6 |
1.5 |
| Φ16×Φ4×3.0 |
16 |
4 |
3 |
| Φ15×Φ6×2.9 |
15 |
6 |
2.9 |
| Φ15×Φ6×2.0 |
15 |
6 |
2 |
| Φ15×Φ6×1.5 |
15 |
6 |
1.5 |
| Φ14×Φ6×1.5 |
14 |
6 |
1.5 |
| Φ13.5×Φ6×2.0 |
13.5 |
6 |
2 |
| Φ13.5×Φ6×1.5 |
13.5 |
6 |
1.5 |
| Φ13.5×Φ6×1.0 |
13.5 |
6 |
1 |
| Φ12×Φ3×3.0 |
12 |
3 |
3 |
| Φ10×Φ4×3.0 |
10 |
4 |
3 |
| Φ9×Φ2×2.0 |
9 |
2 |
2 |
| Φ8×Φ1.5×1.1 |
8 |
1.5 |
1.1 |
| Φ7×Φ1.9×1.2 |
7 |
1.9 |
1.2 |
| Φ6.4×Φ1.5×1.3 |
6.4 |
1.5 |
1.3 |
| Φ3.5×Φ1×1 |
3.3 |
1 |
1 |
| Φ3.3×Φ1×1 |
3.5 |
1 |
1 |
| Φ3.5×Φ1×1 |
 |
3.5
3.3 |
 |
1
1 |
 |
1 |
 |
 |
 |
 |
 |
| Φ3.3×Φ1×1 |
 |
 |
 |
| Â |
 |
| Â |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |