Model NO.: MMA250I/300I/400I/500I/630I
Protection Degree: IP21s
Current: Direct Current
Model: MMA-250I/300I/400I/500I/600I
Application: DIY Welding
Trademark: OEM
Transport Package: Export Box
Specification: 400*200*385
Origin: China
HS Code: 85153900
Model NO.: MMA250I/300I/400I/500I/630I
Protection Degree: IP21s
Current: Direct Current
Model: MMA-250I/300I/400I/500I/600I
Application: DIY Welding
Trademark: OEM
Transport Package: Export Box
Specification: 400*200*385
Origin: China
HS Code: 85153900
Product Description1.Smoothly runs a wide range of rods from 1.6-8.0mm .
2.Stable arc DC inverter IGBT technology ,High duty cycle ,
3.Portable design , excellent overload and anti-static protection ,
  Easy arc start and deep penetration ability .
4.Easy arc start and strong compensation capability, high frequency ,fan     cooled .
5.Suitable for welding carbon steel, alloy steel, cast iron, stainless steel      ,etc.
6.compete with electrode holder , earth clamp , face mask , hammer. Â Â
| ITEM |
MMA250I |
MMA-300I |
MMA-400I |
MMA-500I |
MMA-600I |
| Rated supply voltage(V) |
380 |
380 |
380 |
380 |
380 |
| Supply frequency(Hz) |
50/60 |
50/60 |
50/60 |
50/60 |
50/60 |
| Rated input capacity(KVA) |
9.4 |
14 |
18.4 |
28 |
36 |
| No-load voltage(V) |
65 |
67 |
67 |
72 |
72 |
| Current range(A) |
20-250 |
20-300 |
20-400 |
20-500 |
20-630 |
| Rated duty cycle(%) |
60 |
60 |
60 |
60 |
60 |
| usable eletrode(mm) |
1.6-5.0 |
2.0-5.0 |
2.0-6.0 |
2.0-5.0 |
2.0-8.0 |
| Protection degree |
IP21S |
IP21S |
IP21S |
IP21S |
IP21S |
| Weight(kg) |
15 |
20 |
23 |
28 |
30 |
| machine size(mm) |
400*200*385 |
400*200*385 |
475*222*410 |
550*300*460 |
550*300*460 |
Â
Product Description1.Smoothly runs a wide range of rods from 1.6-8.0mm .
2.Stable arc DC inverter IGBT technology ,High duty cycle ,
3.Portable design , excellent overload and anti-static protection ,
  Easy arc start and deep penetration ability .
4.Easy arc start and strong compensation capability, high frequency ,fan     cooled .
5.Suitable for welding carbon steel, alloy steel, cast iron, stainless steel      ,etc.
6.compete with electrode holder , earth clamp , face mask , hammer. Â Â
| ITEM |
MMA250I |
MMA-300I |
MMA-400I |
MMA-500I |
MMA-600I |
| Rated supply voltage(V) |
380 |
380 |
380 |
380 |
380 |
| Supply frequency(Hz) |
50/60 |
50/60 |
50/60 |
50/60 |
50/60 |
| Rated input capacity(KVA) |
9.4 |
14 |
18.4 |
28 |
36 |
| No-load voltage(V) |
65 |
67 |
67 |
72 |
72 |
| Current range(A) |
20-250 |
20-300 |
20-400 |
20-500 |
20-630 |
| Rated duty cycle(%) |
60 |
60 |
60 |
60 |
60 |
| usable eletrode(mm) |
1.6-5.0 |
2.0-5.0 |
2.0-6.0 |
2.0-5.0 |
2.0-8.0 |
| Protection degree |
IP21S |
IP21S |
IP21S |
IP21S |
IP21S |
| Weight(kg) |
15 |
20 |
23 |
28 |
30 |
| machine size(mm) |
400*200*385 |
400*200*385 |
475*222*410 |
550*300*460 |
550*300*460 |
Â
Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flowchat of Continuous Waste Tyre Pyrolysis Plant
Advantages of Continuous Waste Tyre Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Tyre Pyrolysis Plant
|
NO.
|
ITEM
|
Technical Parameter
|
|
1
|
Suitable Raw Materials
|
Small pieces of Waste tyre,rubber, waste plastic≤5cm
|
|
2
|
Operating Mode
|
Fully Continuous Operation
|
|
3
|
Structure
|
Horizontal Type Revolve
|
|
4
|
Loading and discharging
|
Fully Automatic Feeding and Discharging under High Temperature at Same Time
|
|
5
|
Capacity(24h)
|
8-20Mt
|
|
6
|
Work Pressure
|
Slightly Negative Pressure
|
|
7
|
Oil Yield of tyres
|
40%-45%
|
|
8
|
Reactor Rotational Speed
|
1R/M
|
|
9
|
Installation Power
|
110kw
|
|
10
|
Cooling Method
|
Cycle water
|
|
11
|
Type of Drive
|
Sprocket Wheel
|
|
12
|
Heating Method
|
Hot Air
|
|
13
|
Noise dB(A)
|
≤85
|
|
14
|
Main Reactor Weight (MT)
|
About 20Mt
|
|
15
|
Total Weight(MT)
|
About 45Mt
|
|
16
|
Installation Space Required
|
60m*20m
|
|
17
|
Manpower
|
2/shift
|
|
18
|
Shipment
|
5*40HC
|
|
19
|
Delivery time
|
≤70Days
|
Continuous Waste Tyre Pyrolysis Plant
Continuous Pyrolysis ,Continuous Pyrolysis Plant,Continuous Waste Tyre Recycling,Waste Tyre To Oil
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com