Kp180t Injection Molding Machine Servo Motor Drive Energy Saving Injection Machine for Plastics PP-PE-PVC-ABS
ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard covers pressure-temperature ratings, materials, dimensions, tolerances, marking, testing, and methods of designating openings for pipe flanges and flanged fittings. Included are:
B16.5 is limited to flanges and flanged fittings made from cast or forged materials, and Blind Flanges and certain reducing flanges made from cast, forged, or plate materials. Also included in this Standard are requirements and recommendations regarding flange bolting, flange gaskets, and flange joints.
Careful application of these B16 Standards will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes.
Intended for manufacturers, owners, employers, users and others concerned with the specification, buying, maintenance, training and safe use of valves with pressure equipment, plus all potential governing entities.
ANSI So Flange,Ansi Slip On Flange,Class400 So Flanges,Class400 Slip On Flange Hebei Welkin Pipe Fitting Manufacturing Co., Ltd , https://www.welkinpipeline.com
SPECIFICATION
UNIT
                       PT180
INJECTIONÂ UNIT
Â
      A
      B
        C
Screw Diameter
mm
40
45
50
Length/Diameter Ratio
L/D
22
19.5
17.6
Theoretical Injection Pressure
MPa
215
169
137
Theoretical Shot Volume
cm³
282.6
357.7
441.6
Injection Weight(PS)
g
265.6
336.2
415.1
Injection Rate(PS)
g/s
112.2
142
175.3
Plasticzing Capacity
g/s
17.8
25
33.8
Naxunyn Screw Speed
rpm
205
CLAMPINGÂ UNIT
Â
Â
Clamp Tonnage
kN
1800
Toggle Stroke
mm
430
Soace Between Tie Bars(H x V)
mm
472 x 472
Max.Mold Height
mm
520
Min.Morld Height
mm
150
Ejector Tonnage
kN
45.2
Ejector Stroke
mm
142
Ejector Number
piece
5
OTHERS
Â
Â
System Pressure
MPa
16
Pump Moter Power
kW
15
Heating Powre
kW
9.6
Hopper Capacity
Kg
25
Machine Dimensions(LxWxH)
m
5.4 x 1.31 x 2.08
Oil Tank Capacity
L
248
Machine Weight
T
5.3
Â
(1) flanges with rating class designations 150, 300, 400, 600, 900, and 1500 in sizes NPS 1/2 through NPS 24 and flanges with rating class designation 2500 in sizes NPS 1/2 through NPS 12, with requirements given in both metric and U.S. Customary units with diameter of bolts and flange bolt holes expressed in inch units;
(2) flanged fittings with rating class designation 150 and 300 in sizes NPS 1/2 through NPS 24, with requirements given in both metric and U.S. Customary units with diameter of bolts and flange bolt holes expressed in inch units;
(3) flanged fittings with rating class designation 400, 600, 900, and 1500 in sizes NPS 1/2 through NPS 24 and flanged fittings with rating class designation 2500 in sizes NPS 1/2 through NPS 12 that are acknowledged in Non-Mandatory Appendix E in which only U.S. Customary units are provided.
This Standard is to be used in conjunction with equipment described in other volumes of the ASME B16 Series of Standards as well as with other ASME standards, such as the Boiler and Pressure Vessel Code and the B31 Piping Codes.